전기차 배터리팩 내 열분석 및 성능개선 열유동해석(영어 발표 ppt 자료 및 레포트)

안녕하세요!! 평생 행복 하고픈 콘텐츠 마케터 입니다.

오늘은 해피캠퍼스에서 발췌한 “전기차 배터리팩 내 열분석 및 성능개선 열유동해석(영어 발표 ppt 자료 및 레포트)” 내용을 정리하여 알려드립니다.

목차

1. Introduction
1.1 Background for selection of research topics
1.2 Selection of cooling methods
1.3 Theoretical background

2. Methods
2.1 Properties
2.2 Modeling
2.3 Mesh and Set up
2.4 Boundary Condition

3. Results
3.1 Iteration
3.2 Contour of temperature
3.3 Contour of heat transfer coefficien

4. Discussion

5. Conclusion

6. References

 

본문내용일부

The demand for batteries is increasing due to the development of electric vehicles. However, there is a problem that the heat generation from battery increases as the charge and discharge cycle progresses and it leads the battery efficiency degraded. Therefore, we conducted analysis to control the generated heat from the cells and improve the cooling performance. In this report, we only considered lithium-ion batteries which are widely used and air-cooled method which has simpler structure than water-cooled system. We used cell properties of 21700 30T (Samsung SDI) and battery pack dimensions from Tesla Model 3 for our simulation realistic. We made 5 different battery pack models. As a default model, we set rectangular parallelepiped shape and inlet/outlet position at the center of the two facing sides. Then we moved inlet and outlet position about 90mm left, distributed the inlet, and added fins to battery pack’s outside and inside. For these models, we simulated air-cooled system and compared the result of battery cells temperature.

 

참고문헌

Frank P. Incropera, Principles of Heat and Mass Transfer 8th, Wiley [Accessed on 21.05.20]
Batemo cell library, Samsung INR21700-30T Batemo cell_data and report [Accessed on 21.05.20]
Jaehun Choi, Improved Cooling Performance by Staggered Cell Arrangement of Lithium-ion Battery Pack, Graduated School of Mechanical Engineering, Changwon Nat’1 Univ. [Accessed on 21.05.20]
Tmax Battery equipment, https://ko.batterymaking.com/product/cylindrical-cell-lithium-battery-material-for-18650-26650-32650-21700-cell-making-and-production_p518.html [Accessed on 21.05.20]
Seokil Kim, Experimental Analysis on the Thermal Characteristics of Lithium-ion Battery for ESS, Kangwon national university [Accessed on 21.05.20]
Hyun Jang Shin, Cooling CFD Analysis of a Car Batter Pack with Circular Cells, Dept. of Mechanical Engineering, Yonam Institute of Digital Technology[Accessed on 21.05.20]
EV West, https://www.evwest.com/catalog/product_info.php?cPath=4&products_id=463&osCsid=rp0cj2i33tp2j88tnj80dto4e5 [Accessed on 21.05.20]
SeoKeunLee, A numerical study on performance of the air-cooling system of a cylindrical lithium-ion battery package with airflow direction, Graduate School of Automotive Engineering, Seoul National University of Science & Technology [Accessed on 21.05.23]

해당 자료가 필요하신 분은 “전기차 배터리팩 내 열분석 및 성능개선 열유동해석(영어 발표 ppt 자료 및 레포트)” 으로 해피캠퍼스에서 확인해 보세요.